Here are 14 Free Plugins you should check out !
1.Epic Clouds - Variety of Sound
The ambient reverb is specifically designed to emulate the reverberation characteristics of large, open spaces or natural environments. It aims to create a sense of immersion and a feeling of being in a larger acoustic environment, such as a concert hall, cathedral, or outdoor setting. It typically has a longer decay time compared to other types of reverb and provides a very lush and expansive sound.
System Support
▷ Windows Only
▷ VST and VST3
2.Multiply - Acon Digital
Acon Digital Multiply is a free and versatile chorus effect with a unique twist. Each simulated voice is processed with a phase randomizing filter so that unpleasant comb filter effects are avoided. The effect can be used to simulate the effect of several performers playing the same tones simultaneously, to widen the spatial image or to create special effects for sound design. Multiply can simulate up to 6 additional voices and both the pitch and the loudness of the voices can be modulated. There is also an integrated equalizer consisting of low cut, low shelf, high shelf and high cut filters that can be applied to the effect signal. An integrated pre-delay section makes it possible to create modulated and diffuse echo effects.
System Support
▷ Mac and Windows
▷ VST | VST3 | AAX
3. Atone- Analog Obsession
A Channel Strip with A-Type EQ, Filters and 436 style Compressor
It has lots of capabilities for tone shaping with its own custom design and internal routing.
There is no line or mic preamp as an input module but INPUT knob will drive EQ circuit's Gain Trim to get nasty op-amp saturation.
Compressor section based on 436c with extra modifications. Compressor has AMOUNT knob to compression and make-up gain. So, it will be gain compensated.
System Support
▷ Mac and Windows
▷ VST 3 | AU | AAX
4. Dynamic EQ - Initial Audio
Dynamic Eq is a parametric equalizer with multi-band compression features. Each band has a built in compressor, precise frequencies can be dynamically cut or boosted by setting the threshold. A level meter is available for each band with a marker showing the current threshold level. This gives a level of control over the frequencies in your mix that is not possible with a standard equaliser. This feature is very useful for de-essing or reducing resonant frequencies dynamically.
Dynamic Eq can be used as a standard equaliser for your day to day needs, when you need more control our transparent compression algorithm can be used to tame or boost specific frequencies.
Dynamic Eq is designed to be intuitive and super simple to use. With a sleek and modern design dynamic Eq was made for the modern day producer. It’s all about the visual feedback, you won’t have to rely on your ears alone. The movement of the main Eq curve shows clearly which frequencies are being boosted or cut. The level meter gives a clear view of how loud a particular band is, while the frequency analyser gives an accurate overview of all the prominent frequencies in your mix.
System Support
▷ Mac and Windows
▷ VST, AU and AAX
5.Mix Harmony - Lotus Sounds
MixHarmony is meticulously engineered for versatility. Sculpt, color, and create your signature sound with ease. Whether you're mixing a smooth jazz track or mastering a rock anthem, MixHarmony is your new go-to plugin !
System Support
▷ Mac and Windows
▷ VST3 | AU
6.Gnarl - Myroslav Artiukh
Gnarl can add different textures to your sound: Glitchy Clicks and Noise, Warmth, Deepness etc. These textures are created using different distortion algorithms, filtering and reverb.
System Support
▷ Mac and Windows
▷ VST 3
7.ZL Equalizer - ZL Audio
ZL Equalizer is a 16 Band Dynamic Eq Plugin and a very strong competitor for TDR Nova GE.
It has some great features like Collision which enables you to see the clashing frequencies when you are in side-chain mode. Each Frequency is marked with a corresponding Note,Each Band cane be processed in either Stereo,Left or Right, Mid and Side Modes and the list goes on and on.
System Support
▷ Mac and Windows
▷ VST3 | AU
8.Endless - DDMF
Endless is a reverb plugin based on an algorithm that resembles a vocoder in some way, using granular synthesis and spreading out the frequency information of the incoming signal over time. It can also detune and shift the frequency content to create eery effects that cannot be achieved with traditional reverbs.
System Support
▷ Mac and Windows
▷ VST | AU
9.Fine Classic Saturator - Fine Classic Plugins
Introducing the Fine Classics Saturator, a versatile plugin featuring seven unique saturation algorithms, a transient shaper for dynamic control, and a tone knob for effortless tonal shaping. Enhance your audio with rich harmonics, precise dynamics, and intuitive tone adjustments, perfect for elevating any mix.
System Support
▷ Mac and Windows
▷ VST | AU | AAX
10.PCEQ5 - Psycho Circuitry
The Full Paid version is a 5 band analog inspired EQ. High and Low shelves, 3 bell filters. All switchable between Active or Passive inspired filter shapes. Adjustable Q, frequency and gain. High pass and low pass filters with 3, 6, 12, and resonant 12 selections. Per band stereo separation control. Per band Feedback Loop distortion send. Feedback distortion section that simulates active eq nonlinearities, with hpf/lpf to shape into your sound. Output stage with Tube or Solid state models, drive and blend control. Auto Gain with additional adjustment. Up to x16 oversampling, stereo or mono operation.
The Free Version has the same technology as the plus version, without per band stereo separation, per band fb send, fb filter, single output stage, only 6/12 hpf/lpf options.
System Support
▷ Mac and Windows
▷ VST3 | AU
11.Mix Space - Mannix² Audio Technology
Mix Space is the revolutionary audio plugin designed to transform your mixing workflow and bring clarity to your tracks. Perfect for producers, engineers, and musicians, Mix Space gives you the tools you need to make the key elements in your mix stand out with stunning clarity.
System Support
▷ Mac and Windows
12.Bandbreite - Sinuslabs
Add warm, analog character to your drums, basses, and 808s. From subtle warmth to slamming saturation, this free plugin delivers.
Features:
Analog Character
Tape Slam
Flutter Effect
Tube Saturation
HOT Signal Mode
System Support
▷ Mac and Windows
▷ VST3 | AU
13.Ahead - Analog Obsession
Little box for big sound!
Finally, updated and combined all guitar amp plug-ins into one plug-in!
One M-Type, two F-Type and a custom design amps!
FEATURES
- 4 amp models (Red Button)
- Volume 1-2: Volume(Gain/Drive) for amp models. Only M-JTAMP uses both of Volume knobs
- M-Type Tonestack
- Master Volume
- Main Bypass (Footswitch or AHEAD label) ---NO OVERSAMPLING---
System Support
▷ Mac and Windows
▷ VST3 | AU | AAX
14.Dynamension - Flandersh Tech
Breaking up the ordinary structure of compressors and expanders, Dynamension make it possible to feed the main path, sidechain and gain control with creative effects. If you have dreamed about controlling the delay time with the momentary loudness of your track or just want some instrument compression or a gentle hard-knee limiter, Dynamension is for you.
Features:
Compressor, Gate and Expander.
Dynamic EQ and Dynamic Delay.
Peak, RMS and Momentary Loudness Detector.
Modular main path and side chain
High Quality Hard-Knee Limiter.
Mid/Side Option.
System Support
▷ Windows 8 and above (64 Bit Only)
▷ VST3
Lets us know which of these you guys love and use it in your production!
If you found this useful and would like to support us. do click on the link below !
Comments